Seplos 48V 100A LiFePO4 BMS
The Seplos 48V 100A LiFePO4 BMS provides a robust battery management tool designed for 16s cell battery packs.
Seplos BMS contain a vast range of protective features to ensure your LiFePO4 battery pack operates within safe operating limits, recognises fault conditions, and takes appropriate action to prevent damage to the battery and any connected equipment.
Utilising CANBUS and RS485 communication inputs, the Seplos BMS can be programmed to communicate with inverters, chargers or loads, to optimise its performance and protect the battery pack from overcharging, over-discharging, short circuits, and overheating. A full user manual can be downloaded here.
This version of the BMS comes with Bluetooth functionality, and the display screen.
Monitors total voltage, voltages of individual cells, minimum and maximum cell voltage
Monitors environmental temperatures, temperature of cells and BMS PCB
State of charge indication
CANBUS 24/48V 8S/16S 100A lithium iron phosphate smart monitoring management system
BMS can support up to 16 cells in parallel operation
RS485 communication (RS485 can be customised)
CANBUS and RS485 supports a wide range of Inverters, please refer to the Manual for more information.
Charge, discharge and ambient temperature protection
Charge and discharge over current protection
Charge current limitation
Short circuit protection
Over voltage protection
Under voltage protection
|Battery type||LiFePO4 (16S)|
|Communication protocol||CANBUS (default) RS485|
|Current limiting (charging)||10A|
|Working mode power consumption||<40mA|
|Sleeping mode power consumption||0uA|
|Remaining capacity protection||5%|
|Short circuit protection lock times||5 times|
|Short circuit protection lock release||Connected with charger|
|Over voltage protection||3650mV|
|Under voltage protection||2700mV|
|Over voltage protection||57.6V - 58V|
|Under voltage protection||41.6V - 40.6V|
|Over current protection||60A/110A/160A/210A|
|Over current protection||30mS|
Documents for download