The Victron Energy IP65 Blue Smart Charger is a 12v 10A, Bluetooth enabled, IP65 rated Waterproof charger.
The portable IP65 Blue Smart Charger is a portable, lightweight and safe choice for those looking to charge their Lithium batteries on the go. The IP65 Blue Smart Charger contains the latest in professional charging technology, utilising a seven-step charging algorithm to maximise your battery life, and elongate your battery performance.
Victron Energy Blue Smart chargers work to recharge a deeply-discharged battery by effectively 'force-feeding' it with a low current. The charger then subsequently resumes a normal current input as soon as there is sufficient voltage across the battery terminals.
The IP65 Blue Smart Charger contains a wide range of fantastic features including short circuit protection, overheat protection, reverse polarity protection, and automatic storage mode - the charger is also completely water, dust and chemical resistant.
The built-in Bluetooth allows you to monitor the status of your charger via any device. All charger settings can be configured with the VictronConnect app.
The Victron Energy IP65 12v 10A is recommended for batteries with a capacity up to 100Ah.
Note: Pack includes crocodile clips and 8mm ring terminals for battery connection.
- Water, dust and chemical resistant (IP65 splash and dustproof)
- Seven step smart charge algorithm
- Recovery of fully discharged 'dead' batteries
- Automatic power supply function
- Severe cold performance: down to -30°c
- Several other battery life enhancing features
- Low power mode to charge smaller batteries
- Charges all battery types, Li-ion, LiFePO4, Wet, Gel, AGM
- Set-up and configure, readout of voltage and current by Bluetooth Smart
- Automatic temperature compensation for Lead Acid batteries
- Can act as a power supply unit (PSU)
- No fan, quiet charging
- Reverse polarity protection
- Overheat protection
- Short circuit protection.
Recommended battery capacity: up to 100Ah
Input voltage rating: 180-265V AC
Output voltage: 13.2-14.4VDC (dependent upon settings and charge stage)
Max. charge current: 10A
Low current mode: 3A
Standby power consumption: 0.5W
'No load' power consumption: 1mA (0.7Ah per month)
Efficiency: 94%
Mains connection: 3-pin UK plug (BS1363) on 1.5m cable
Battery connection: Croc clips / 8mm ring terminals on 1.5m cables - included.
Protection rating: IP65 (splash and dustproof)
Temperature compensation: 16mV/ºC
Operating temperature: -40ºC to +60ºC (full rated output up to +30ºC, then output reduces)
Cooling method: Natural cooling (no fan)
Product dimensions: 60(H) x 105(W) x 190(L) mm.