The Victron Energy Blue Smart IP22 Charger is a 24v 16A, Bluetooth enabled, one battery output charger.
The Blue Smart IP22 Charger uses a six stage charging adaptive charging algorithm;
Test - Bulk - Absorption - Recondition - Float - Storage.
The adaptive battery management software monitors the way your battery is charging, and automatically optimises the charging process to suit the usage pattern. When the battery is charged to full capacity, or has not been used for 24 hours, the battery storage mode kicks in and power consumption drops to less than 0.5W.
This battery is ideal for deep cycle LiFePO4 batteries, particularly those used in motorhomes, caravans, boats and off-road vehicles - up to 160ah in capacity.
The built-in Bluetooth allows you to monitor the status of your charger via any device. All charger settings can be configured with the VictronConnect app.
- Adaptive charging algorithm - Test - Bulk - Absorption - Recondition - Float - Storage
- Quiet fan function
- Automatic power supply function
- Bluetooth connectivity
- Night and Low function, reduction to 50% nominal output
- Overtemperature protection
- Low power mode to charge smaller batteries
- Charges all battery types, Li-ion, LiFePO4, Wet, Gel, AGM
- Set-up and configure, and monitoring by Bluetooth connection
- Can act as a power supply unit (PSU) when no battery is connected
- 5 year manufacturers warranty
Note: No output cables or connectors are included.
Recommended battery capacity: between 80 - 160ah
Input voltage rating: 180 - 265V AC
Output voltage (absorption/float/store): 14.2-14.7/13.5-13.8/13.2-13.5 VDC
Max. charge current: 16A
Low current mode: 8A
Min. Battery Capacity: 80Ah
Inputs: One
'No load' power consumption: 0.5w
Efficiency: 93%
Mains connection: 3-pin UK plug (BS1363) on 1.5m cable
Battery connection: Ring terminals on 1.5m cables - included.
Operating temperature: -40ºC to +60ºC
Cooling method: Fan assisted
Product dimensions: 235(L) x 108(W) x 65(H) mm
Battery connection: Screw clamp terminals for max. 16mm² cable.