Designed for use with our 3.2V LiFePO4 Prismatic Cells, the JBD-UP16S019 16S 48V 200A BMS, complete with Bluetooth support and heating interface, is ideal for those looking to manage a 48V lithium battery set-up. This BMS can also be used in an 8S (24V nominal) configuration.
The BMS is an integral part of your lithium battery system. It helps to extend the lifespan of your battery pack by protecting your cells against potential faults, automatically disconnecting charge or discharge should an issue be detected.
The JBD Smart BMS platform is packed with protective and monitoring features, making it an excellent choice for use with LiFePO4 battery systems.
The JBD 48V 200A 16S BMS Features Include:
- Overcharge protection
- Over-discharge protection
- Charge overcurrent protection
- Discharge overcurrent protection
- Short circuit protection
- Temperature protection
- Relay control programme
- Pre-discharge function
- Passive cell balancing
- Capacity calculation
- Parameter setting adjustment via software
- Communication support (Bluetooth / RS485 / CAN depending on configuration)
Additionally, the JBD BMS allows you to monitor pack performance, perform diagnostics, record data and determine critical levels such as pack State of Health (SOH) and State of Charge (SOC).
Parallel functionality is supported on the UP16S019 platform when configured correctly via DIP addressing.
We strongly recommend that you have a good working knowledge of LiFePO4 systems and BMS electrical equipment before purchasing this product.
SPECIFICATIONS
Model JBD-UP16S019 200A
Cell Chemistry LiFePO4
Pack Structure 8S–16S (16S nominal 48V)
Nominal Voltage Per Cell 3.2V
Charging Voltage 3.65V × number of strings
Continuous Charge Current 200A
Continuous Discharge Current 200A
Operation Mode Common Port
Operating Temperature -20°C~75°C
Circuit Resistance ≤20mR
POWER CONSUMPTION
Running Consumption (16S): ≤30mA
Sleep Mode: ≤200uA
Power Down Mode: ≤20uA
Exit power-down mode: connect charger or press key.
TERMS AND CONDITIONS
- 1 year warranty on all JBD BMS products. Warranties only apply to the original owner and are non-transferrable. Fogstar will verify your purchase prior to processing any warranty claims or returns.
- If it is determined that the product is faulty, we will ship a new product to you immediately, you will only be asked to cover the cost of the shipping.
- Our warranty does not cover items that have been damaged due to gross negligence, normal wear and tear, damage due to accident or collision, abuse or incorrect installation.
- Do not leave your BMS in direct sunlight or exposed to any heat source, your BMS should be stored in an ambient temperature of -5°C~+40°C, and a relative humidity of not more than 70%.
- Never leave a battery unit unattended whilst charging.
- Keep away from animals and children.
- Only use within manufacturers specifications.